Cut Edge Corrosion

Guarantees

We are able to offer full insurance backed guarantees up to 20 years (on selected products) nationwide.

Spayed coating, in and out quickly

Sprayed coatings allow us to get the job done quickly with minimal disruption and outstanding levels of quality.

Cost efficient

Our systems can delay or prevent repainting a whole roof or delay replacing gutters. Making us a cost effective choice.

Cut Edge Corrosion Treatment

If you notice that the panels of cladding on your commercial or industrial roof are suffering from cut edge corrosion, don’t panic, simply get in touch with a member of the team at MJJM Industrial Painting Contractors.  Our team has years of experience when it comes to industrial and commercial buildings, including the treatment and repairs of cut edge corrosion.  Cut edge corrosion occurs when the edges of painted metal sheets are exposed to the elements, left untreated you will be faced with degradation and failure of the building envelope.  When you choose MJJM Industrial Painting Contractors, you can rest assured that our team of specialists will treat the cut edge corrosion efficiently and effectively.  To arrange to receive a FREE no-obligation quote, get in touch with a member of our team today.

Cut Edge Corrosion Repairs

Here at MJJM, we are renowned for carrying out the efficient and effective repairs of the metal roof sheets and cladding across commercial and industrial buildings, no matter how big or small the repair is, you can rest assured that our team has all of your needs and requirements covered.  Dealing with cut edge corrosion early can stop the failure of the coating across the whole sheet and acts as a cost effective preventative measure which can help delay the repainting of your whole roof or even prevent t a full roof replacement over a sheet.  When you choose MJJM for cut edge corrosion repairs, you can rest assured that no matter where in the UK you are based we will have a specialist who can provide you with a quality and affordable repair.  If you would like more information, or have any questions, be sure to get in touch with a member of our team today.

Cut Edge Corrosion Specialists

At MJJM Industrial Painting Contractors, we have a team of trained and skilled cut edge corrosion specialists on hand to help when your commercial or industrial building is faced with cut edge corrosion.  Our team have years of experience and a wealth of knowledge when it comes to cut edge corrosion, so will be on hand to provide you and efficient and effective solutions based on your property.  We understand that every building we assess will be different, that is why we ensure that all of our cut edge corrosion treatment and repair plans are unique to the building we are treating.  

When you choose the team at MJJM you can trust that no matter where in the UK you are based a cut edge corrosion specialist will be on hand to assess the damage and provide a solution.  So if you find yourself searching for cut edge corrosion treatment near me or cut edge corrosion specialists near me, be sure to make MJJM Industrial Painting Contractors your first and only port of call you won’t be disappointed, get in touch with us today to resolve the problem sooner rather than later.

What is Cut Edge Corrosion?

Cut edge corrosions generally occur on metal sheets that are used for industrial and commercial roofs.  When metal cladding is manufactured the sheets are coated with a plastic such as Plastisol or Pvf2, the protective coating is designed to stop the underlying metal from corroding when exposed to the elements.  However, once the sheet has been cut to the correct size, the edge that has been cut is left with no protection and the metal is exposed.  When the sheet has been used on the roof or construction of a building, it will be exposed to the elements and cut edge corrosion occurs.  With cut edge corrosion treatments from MJJM, you can have complete peace of mind that the metal cladding, sheets and overlapping joints are fully protected.

Paint Chipping

Cut Edge Protection Method

Here at MJJm Industrial Painting Contractors, we take great pride in providing commercial and industrial customers throughout the UK with quality and cost effective cut edge corrosion treatment. To ensure all of our customers receive a high quality repair we make sure that all of our team undergo the required training and have the same passion for protecting buildings as we do. To ensure we treat cut edge corrosion effectively we follow a stringent method:

  • We will remove all of the loose delaminating plastic coating with a high powered pressure wash, this will also enable us to remove any rust that has developed (however, it should be noted that if any of the metal sheets are corroded badly, they may need to be replaced)
  • We will ensure that we coat the edge of the panel to a minimum of 5cm past any bolts and fittings
  • Once the paint has dried we will then apply Elastoil or Seamsil
  • For the finishing touch we will apply two coats of specialists paint

When you choose the team at MJJm to treat any cut edge corrosion, you can have complete peace of mind that we only use high quality products from industry leading manufacturers to ensure that you receive an efficient and effective repair.

Why Choose MJJM For Cut Edge Corrosion Treatments

MJJM have been providing clients throughout the UK with the best cut edge corrosion treatments available, using the latest technology our skilled cut edge corrosion specialists can provide effective solutions for all your requirements, no job is too big or small for us, so don’t hesitate to get in touch. From single panels to large scale treatments, we are here for you. With years of experience and a wealth of knowledge when it comes to cut edge corrosion you can rest assured that your building is in safe hands. Here at MJJm we pride ourselves on working closely with all of our client and ensuring that they are all completely satisfied with service received. Our team offer a safe, reliable, professional and affordable service from start to finish, some of the reasons you should choose when you are looking to fix cut edge corrosion at your premises include:

  • We go the extra mile – we can arrange to visit your site and we will provide a bespoke solution for your property
  • Honest – we ensure that we offer you unbiased and impartial advice that includes the recommend treatment and solutions for you
  • Experts – we offer a range of high performing cut edge corrosion treatments
  • Great Value – we ensure that all of our products and services are competitively priced, ensuring you receive a value for money service
  • Knowledgeable – we’re home to a technical team who provide straight forward and practical advice
  • Efficient – we will provide a quick and efficient service, ensuring there is as little disruption as possible to your working day

Call The Cut Edge Corrosion Specialists at MJJM Today

If you are in need of cut edge corrosion specialists, be sure to get in touch with a member of the team at MJJM Industrial Painting Contractors.  When you choose us you can rest assured that we only use industry leading products, with industry leading machinery to ensure that the work is completed to the highest standards possible.  To ensure your metal sheeting isn’t just protected but looks good too, be sure to get in touch with a member of our team today.  We will be more than happy to answer any questions you may have or to arrange for a FREE quote.

Gallery of our work

Frequently Asked Questions

How do you spot edge corrosion?

Cut edge corrosion can generally be found around the edges of metal sheets where they overlap or at the edges.  Metal guttering is also susceptible to cut edge corrosion.  If you think your commercial or industrial building may be suffering from cut edge corrosion be sure to get in touch with a member of our team, we can offer an on site survey and let you know of our findings. 

What will happen if I don’t treat cut edge corrosion?

We would never recommend leaving cut edge corrosion untreated, as if left untreated you may find yourself with more costly repairs.  If you choose to leave the cut edge corrosion untreated the original protective coating will start to peel and the reverse side metal will also begin to rust and corrode.  This could also result in leaks if subject to water/rain, which will cause more damage to the building too.  To ensure your building is fully protected, get in touch with us today.

Do cut edge corrosion treatments work?

Yes, repairing cut edge corrosion can help to protect the metal sheeting from the elements and reduces the damage caused.  Effective and efficient treatments will provide a seal to both horizontal lap and lap joints.  When you choose MJJM to carry out cut edge corrosion treatments, you can trust that your building won’t just be protected the aesthetics of the building will look better too.

How do I arrange for a quote?

To arrange for a FREE no obligation quote, get in touch with a member of our team today who will be more than happy to arrange for a FREE on site survey.  From there we can provide you with a bespoke quote to repair your property.

What areas do you cover?

As a national business you can rest assured that no matter where in the UK you are based we have your needs covered.  With years of experience and a wealth of knowledge when it comes to cut edge corrosion and effective treatment plans, there really is no reason for you to go elsewhere.  We are well known throughout the commercial and industrial sectors for the 5* rated repairs we offer, so don’t hesitate to get in touch with a member of our team.

Recieve a free estimate today

About us

MJJM is a Dorset based company established in 2004.  We offer various industrial painting and coating solutions to help transform commercial and industrial premises.

Contact us